FIG. G.1Cornerstone Guide

Reclaimed materials in Denver: a complete buyer's guide.

Real prices, real dimensions, and the things we tell people on the phone every day. Updated August 2026.

Denver has a real reclaimed materials market, and prices in it vary by a factor of five for material that looks similar in a photograph. This guide is what we would tell you if you walked into our yard and asked where to start. Every price below is what we actually charge as of August 2026.

What reclaimed material costs in Denver

Here is the whole price list in one place. Board foot pricing means thickness × width × length in inches, divided by 144.

Reclaimed material prices in Denver — Revolve Reclaimed, August 2026
MaterialPriceTypical use
Pine, live edge$6 / board ftTables, shelving, signs
Reclaimed oak beams$8 / board ftTextured shelving, mantels
Poplar, live edge$8 / board ftPainted work, panels
Silver maple, live edge$12 / board ftTables, tops
Oak transit boards$12 / board ftShelving, benches
Elm, live edge$13 / board ftTables, tops
Ash / beetle kill pine$14 / board ftTables, feature walls
Hand-hewn barn beams$14 / board ftMantels, exposed beams
Cargo flooring$14 / linear ftAccent walls, ceilings
Oak & honey locust, live edge$15 / board ftTables, counters
Douglas fir beams$18 / linear ftStair treads, shelving
Black walnut, live edge$22–35 / board ftDining tables, statement tops
Cherry / pecan, live edge$27 / board ftFine furniture
1911 Union Station fir$6 / board ftMantels, structural accents
COR-TEN steel panels$3.50 / sq ftCladding, planters, screens
Commercial carpet tile$0.25–0.70 / sq ftBasements, rentals, retail
Artificial turf$0.43–0.90 / sq ftYards, dog runs, patios
Billboard tarps$59–95 eachCovers, liners, shelters

Prices current as of August 2026 · call 720·236·0454 to confirm stock

Reclaimed wood and flooring

Boxcar flooring is the decking out of antique rail freight cars — rock maple or oak, 2.25 inches thick, 12 inches wide. That thickness is the point: a single board is a finished countertop with no substrate and no lamination. $200 for an 8ft board, $240 for a 9ft.

Cargo flooring came out of semi-truck trailers, 12 inches wide and 1.25 thick, with shiplap edges already milled in so boards self-align. $14 per linear foot in 10, 12, and 20 foot lengths. It is the fastest way to do an accent wall or a ceiling.

Live edge slabs are Colorado trees milled by Colorado sawyers, all kiln dried. $6 for pine up to $35 for the best walnut. Kiln drying matters more than people expect — a green slab will cup and check after you have already built with it.

Barnwood comes in 20 square foot bundles from $90. Quarter-inch stock goes up with construction adhesive and brad nails; you do not need to hit every stud.

Transit boards got their silver-gray patina hauling steel tubing across the plains. $12 per board foot. Do not sand the silver off — it is a thin surface layer and it will vanish under a belt sander in seconds.

Beams and mantels

Beams are where reclaimed material genuinely beats new, because you cannot buy a new old-growth timber at any price.

Hand-hewn barn beams at $14 per board foot are the classic mantel: axe scallops across the face, mortise pockets, peg holes. Ours are pre-sanded, so you can oil and hang them the day you get home rather than spending a weekend with a wire brush.

1911 Union Station Douglas fir at $6 per board foot is the best value in the yard by a distance. These held a Denver building up for over a century. Old-growth fir has twenty or more growth rings per inch where modern plantation fir has a handful — it is denser, more stable, and carries an amber patina no stain reproduces.

Reclaimed oak beams at $8 per board foot are the most texture per dollar we sell — heavily gouged industrial stock, 5 to 10 inches square in 8 to 18 foot lengths.

To hang any of these, you want a floating bracket. The bracket bolts to studs or masonry, steel rods project out, and you drill matching holes in the back of the beam so no hardware shows. Brackets run $65 to $165.

COR-TEN steel

COR-TEN is a weathering steel alloy. Instead of rusting through, it forms a tight oxide layer that seals the metal underneath and stops corrosion going deeper. It looks completely rusted and stays structurally sound — which is exactly why architects specify it.

Ours came out of a decommissioned coal power plant at $3.50 per square foot, in 26×36in, 26×42in, 32×42in and 36×36in panels with roughly 400 square feet available in each size. No minimums.

Against corrugated tin it wins on every count: flat, rigid, weldable, and free of old fastener holes. One thing to plan for — runoff can stain concrete in the first year while the patina stabilises. Put a drip edge under it or accept the staining as part of the look.

Commercial carpet tile

The single best value in salvage. Gently used commercial tile from local office buildings at $0.25 to $0.70 per square foot, against $3 to $6 for new. Sizes are 18×18, 20×20, 24×24, 12×36 and 18×36 inches.

For a basement, tile beats broadloom carpet outright: if one tile gets wet or stained you lift it and drop in a replacement instead of replacing the room. Installation is pressure- sensitive adhesive or tabs on a clean flat subfloor, cut with a utility knife. No stretching, no tack strip, no power tools.

To estimate: room length × width in feet, divided by tile coverage. A 24×24in tile covers 4 square feet, so a 600 sq ft basement takes about 150 tiles plus ten percent for cuts.

Used artificial turf

Retired sports-field turf, sold by the roll, from $0.43 per square foot. Nothing else covers ground that cheaply.

The logistics matter more than the price here. Rolls weigh 1,100 to 1,400 pounds. You need a flatbed truck or an open trailer with no roof — a pickup cannot be loaded. We load with a forklift; you bring ratchet straps. Trailers rent from Home Depot and U-Haul.

Every roll has field lines and some leftover infill. Soccer turf generally has fewer lines than football turf. Sizes are approximate and cannot be guaranteed exactly, so buy with a margin. Cut it at home from the backing side with a utility knife.

How to tell real reclaimed wood from fake distressing

This is the question we get most from people who have been shopping around.

  • Look for irregularity. Real hand-hewing leaves overlapping scallop marks that vary in depth and never repeat. Machine distressing has a rhythm to it that you can spot across a room once you know to look for it.
  • Look for evidence of a previous job. Mortise pockets, peg holes, notch cuts, nail stains, bolt holes. A beam that held a building up has joinery cut into it.
  • Look at the checking. Natural drying checks follow the grain and run along the length. Cuts made with a tool cross the grain.
  • Look at the growth rings. Old-growth timber has tight, closely spaced rings — often twenty or more per inch. Fast-grown modern lumber has wide spacing you can see from several feet away.
  • Ask where it came from. A seller who cannot tell you the building, the barn, or the field probably does not know. We can tell you for almost everything on our racks.

How to get it home

For lumber, beams and slabs, a pickup or trailer handles most of it. Boards run to 20 feet, so measure your bed and bring a flag if you will be hanging over. For turf you need a flatbed or open trailer, full stop. Carpet tile and tarps go in any vehicle, though tile is heavier by volume than people expect.

We load everything with a forklift. Bring ratchet straps regardless of what you are collecting.

FIG. G.3Questions

Common questions.

How much does reclaimed wood cost in Denver?

Reclaimed wood in Denver runs roughly $6 to $35 per board foot depending on species and type. At Revolve Reclaimed, pine live edge starts at $6, reclaimed oak beams are $8, hand-hewn barn beams and cargo flooring are $14, and black walnut runs $22 to $35 per board foot.

Is reclaimed wood cheaper than new wood?

It depends on the species. Reclaimed softwood beams at $6 to $8 per board foot are usually cheaper than comparable new timber. Reclaimed hardwood like walnut is priced similarly to new but gives you widths and figure that new lumber cannot match. The largest savings are in carpet tile and artificial turf, which run about a tenth of new cost.

How do I calculate board feet?

Board feet equals thickness in inches times width in inches times length in inches, divided by 144. A board 2 inches thick, 12 inches wide and 96 inches long is 16 board feet.

How can you tell if reclaimed wood is real?

Real reclaimed wood carries irregular marks that never repeat — hand-hewn axe scallops of varying depth, mortise pockets, peg holes, nail stains, and checking that follows the grain. Machine-distressed new lumber has a repeating rhythm you can spot across a room.

Where does reclaimed material in Denver come from?

Ours comes from deconstructed Denver buildings, retired rail cars, semi-truck trailers, barns, decommissioned coal power plants, retired sports fields, commercial office buildings, and Colorado trees milled by local sawyers.

What is the cheapest reclaimed material?

Commercial carpet tile at $0.25 to $0.70 per square foot and used artificial turf at $0.43 per square foot are the least expensive materials in the yard. Both are a fraction of new cost for the same product.

Come walk the racks.

800 S Jason St, Denver. Tue–Fri 10–5, Sat 10–4. Walk-ins welcome.